HOME  »  Bed Knobs and a Broomstick »  Viewing Nose Bridle     [Image 3 of 27]  :: Jump To  
  First slide Previous slide      Show/Hide EXIF Info Index Page Start/Stop the slide show      Next slide Last slide Help
Comment: The nose cone's shock cord bridle assembly, to be installed in a tubing coupler. The shock cord retention bridle and the center ring-bulkhead strengthening gussets.
Aft Centering Ring * Aft MMT centering ring, showing engine retaining hardware (a blind nut with a couple of pieces of balsa as an anchor; these will be glued together and assembled behind the ring). A pair of blind nuts will be coupled with two window screen retainers to make my version of a Kaplow Clip. * 2364 x 1286 * (842KB)

Circle Construction * Hauling out my ancient geometry skills to find the center of a circle, for custom-made centering rings. * 2560 x 1920 * (1.05MB)
Next slide
 
Nose Bridle.jpg - 1715 x 2143 - (738KB)
Download file (738KB)
4/23/10 6:41 AM
Nose Bulkhead * It doesn't look like a bulkhead, but it becomes one. The shock cord will attach to the loop in the bridle. * 1671 x 1832 * (633KB)

Bridle Detail * Detail of the shock cord bridle, behind the bulkhead. * 2073 x 1510 * (680KB)

Nose Bulkhead Installation * The nose shock cord bridle and bulkhead assembly installed in the tubing coupler. This will go in the aft end of a short body tube; the nose cone will be attached to the forward end. * 1613 x 1840 * (690KB)

MMT Detail * Motor mount, showing the centering ring, blind nut, and strengthening guessets. * 1775 x 1519 * (565KB)

MMT and Clips * Motor mount, stuffer tube, and Kaplow Clips. You can see the window screen retaining clips on the right (rocket aft), and the gussets. * 2321 x 442 * (288KB)
Album last updated on 5/6/10 10:53 PM
Powered by Jalbum 8.8 and BluPlusPlus skin
Copyright © 2010 Alan M. Marcum, all rights reserved.